add specific g-code to filament
 
Notifications
Clear all

add specific g-code to filament  

  RSS
Guillaume
(@guillaume-2)
Member
add specific g-code to filament

Hi all,

I am struggling with petg warping because my house is full of air flow so I decided to use tpu as first layer for my petg print.

I would like to add g-code to layer 0 with TPU printing parameter and to layer 1 with PETG printing temp settings and a z-offset of 0.1 

how could i do that with the prusa code ? 

 

thanks for your help.

 

Posted : 07/10/2025 1:47 pm
DarrenKunze
(@darrenkunze)
Member
RE: add specific g-code to filament

With Prusa and PrusaSlicer printers you can do this by inserting custom G-code. I think this works quite well!

Drift Boss
Posted : 21/10/2025 5:29 am
_KaszpiR_
(@_kaszpir_)
Noble Member
RE: add specific g-code to filament

> my house is full of air flow
your first idea should be getting an enclosure, and not some more complex print layering

See my GitHub and printables.com for some 3d stuff that you may like.

Posted : 21/10/2025 11:12 am
Share: