Siraya Tech Rebound PEBA Air print profile
Does anyone have the profile settings for Siraya Tech Rebound PEBA Air for Prusaslicer?
Siraya tech supports other brands natively (link here: https://siraya.tech/pages/print-settings-download) and I was hoping to avoid troubleshooting this filament since it looks like others have already spent time making it work well (like in this video here: )
Any help is appreciated!
RE: Siraya Tech Rebound PEBA Air print profile
Does anyone have the profile settings for Siraya Tech Rebound PEBA Air for Prusaslicer?
I've attached mine, calibrated for a 0.6mm nozzle. Still should work with a 0.4 (but I don't recommend it)
RE: Siraya Tech Rebound PEBA Air print profile
I went back and proof-read the profiles and found a couple of mistakes with temp settings. Use this instead
RE:
Does anyone have the profile settings for Siraya Tech Rebound PEBA Air for Prusaslicer?
I have suffered calibrating this filament so that no one else has to. Genuinely didn't think I could get rid of the stringing/blobbing in any meaningful way, but with enough anger patience, I finally got it to print with no stringing on the 95A profile. Haven't had time to test the others, but they tentatively should work.
The attached image was printed on a Core One L 0.6 brass nozzle (filament sensor magnet mod and bogie idler mod) with the 95A filament profile and the included 0.32 layer height profile. Enjoy! 🙂
