Notifications
Clear all
Prusa CoreOne Files
Hi,
I just printed a set of PC-CF dare parts for my core one with 40%Infill and 2 Perimeters. And now I am wondering what the settings suggested by Prusa would be. Could not find them.
Any ideas?
Best wishes
Sascha
Best Answer by gb160:
Napsal : 01/01/2026 2:38 pm
RE: Prusa CoreOne Files
Napsal : 01/01/2026 2:46 pm
1 lidem se líbí
RE: Prusa CoreOne Files
Hi,
I just printed a set of PC-CF dare parts for my core one with 40%Infill and 2 Perimeters. And now I am wondering what the settings suggested by Prusa would be. Could not find them.
Any ideas?
Best wishes
Sascha
Just use the slicer defaults. For the fan shroud, I wanted it to be super strong so I used 4 perimeters. Infill doesn't matter since none of the parts are very large so there is no need to worry about warping.
Napsal : 01/01/2026 3:54 pm
Topic starter
answered:
RE: Prusa CoreOne Files
Thank you for the answers
Napsal : 01/01/2026 4:40 pm