Prusa Core One+: The front display of the printer stays dark
The printer and the display have been working for 5 months now, so it cannot be a mounting or assembly error. I have already disassembled the display and temporarily unplugged and re‑plugged the ribbon cable. I did this on both sides — the XLCD board and the XBuddy board. No effect, the display remains black. On the back of the XLCD board, a green LED is lit, so the power supply seems to be working. The printer also appears to boot based on the sounds it makes. The internal lighting turns on after booting. But the front display stays dark. What can I do?
RE: Prusa Core One+: The front display of the printer stays dark
Contact Prusa support, they can probably help you,
The printer and the display have been working for 5 months now, so it cannot be a mounting or assembly error. I have already disassembled the display and temporarily unplugged and re‑plugged the ribbon cable. I did this on both sides — the XLCD board and the XBuddy board. No effect, the display remains black. On the back of the XLCD board, a green LED is lit, so the power supply seems to be working. The printer also appears to boot based on the sounds it makes. The internal lighting turns on after booting. But the front display stays dark. What can I do?
---
Gert