HT Hotend Upgrade (for CORE One/+ und CORE One L)
I have a problem regarding the HT Hotend Upgrade (for CORE One/+ and CORE One L). The maximum nozzle temperature in the Core One is limited to 260°C, but the upgrade should allow 400°C. How do I configure the firmware to allow me to set a temperature above 260°C?
RE: HT Hotend Upgrade (for CORE One/+ und CORE One L)
https://github.com/metacollin/Prusa-Firmware-Buddy/blob/mc_high_temp/README.md
Core One is limited to 260°C,
I hope that's a typing error.
RE: HT Hotend Upgrade (for CORE One/+ und CORE One L)
Sorry, 290°C
RE: HT Hotend Upgrade (for CORE One/+ und CORE One L)
I have a problem regarding the HT Hotend Upgrade (for CORE One/+ and CORE One L). The maximum nozzle temperature in the Core One is limited to 260°C, but the upgrade should allow 400°C. How do I configure the firmware to allow me to set a temperature above 260°C?
If you are referring to this: HT Hotend Upgrade it won't be available until they release the firmware to support it. Currently the max temp is 290°. There is unofficial firmware as linked by @jan.d.slay but use at your own risk (etc etc).