How to start a print from Prusa Slicer in wifi mode?
When I select 'upload and print' in Prusa Slicer, the file is uploaded but I still need to got to the Core One and click one more time on the knob.
Is it possibly to have have the 'upload and print' actually starting the print?
RE: How to start a print from Prusa Slicer in wifi mode?
Hmm, if the printer is "ready" , it starts printing without manual action, in my case. Is it same with connect and link in your case?
RE: How to start a print from Prusa Slicer in wifi mode?
There is the prompt which reminds you to open or close the vent grille. But that times out after a minute or so in the more recent firmware versions.
RE: How to start a print from Prusa Slicer in wifi mode?
In Prusaslicer if you go to dashboard you can confirm the prompt and proceed from there.
RE: How to start a print from Prusa Slicer in wifi mode?
There is the prompt which reminds you to open or close the vent grille. But that times out after a minute or so in the more recent firmware versions.
You are right, it auto starts after a minute or so.
Would be nice to have some timeout progress indication on the LCD screen.
RE: How to start a print from Prusa Slicer in wifi mode?
With the most recent firmware (6.3.4) you can also choose to disable the ventilation prompt entirely, in the Settings menu. I did that after implementing my Nextruder-and-Gcode driven vent automation -- really no need for a user reminder anymore now.