Avisos
Vaciar todo
Página 2 / 2
Anterior
RE: Core One: Belt tuning temperature dependency
I don't think belt expansion is the issue. It's probably more like frame expansion. I would assume the metal frame is expanding when it warms up, pulling on the belts.
Respondido : 24/01/2026 4:03 pm
1 les gusta
Topic starter
answered:
RE: Core One: Belt tuning temperature dependency
Random/crazy thought: Has anybody thought of a CoreXY architecture with dual motors per belt? This would give one degree of freedom for belt tension (putting e.g. a spring-loaded and dampened tensioner mechanism on the non-head section between them to absorb a small amount of slack belt. Especially in combination with an accelerometer for real-time feedback this would enable quite a few advanced dynamic corrections.
Material for a doctoral thesis maybe. Or at least the coffee break...
Respondido : 25/01/2026 4:10 pm
1 les gusta
Página 2 / 2
Anterior