Another Issue: Bed seems not to be leveled / back Left Corner is too high  

RE: Another Issue: Bed seems not to be leveled / back Left Corner is too high

Posted by: @ahrimaan

Now i wanted to use the full Bed size to print something and it seems my bed is off:

The back Left Corner is too high, so the printer "smears" (Nozzle is to low and scratches over the surface)

Any hints how i can fix this problem ?

Best

 f4af5c96-snapshot-buddy3d-camera-1754558673.jpg

I had something similar happen when the plate was caught on a thread of the alignment pins in the back. Re-seating the plate fixed that issue for me.

RE: Another Issue: Bed seems not to be leveled / back Left Corner is too high

Re-seating the plate fixed that issue for me.

This was the first thing i checked and this is not the issue

RE: Another Issue: Bed seems not to be leveled / back Left Corner is too high

There is a printable shim to fix this: Prusa CORE ONE BedLevel Correction & Dust Cover

RE:

I start to regret i bought this thing .....

Posted by: @hyiger

There is a printable shim to fix this: Prusa CORE ONE BedLevel Correction & Dust Cover