Prusa Link on RPI4 not connecting
So I just set up PrusaLink on my MK3S using an RPI 4, and it worked great for 2 days. Then I finished printing the parts for a camera mount (using an old C920 I had), so I wanted to hook it up. I followed the instructions and connected the camera; when I tried booting it back up, it would not show up in Prusa Connect. The first thing I did was shut down and reboot without the camera connected, but it still would not show up. The next thing I tried was shutting it down and just reflashing the SD card to try and start fresh. I boot everything back up, and still nothing; it gives me the go>ip thing on the LCD, and I go to my browser, put the IP in the address bar, and instead of seeing the setup wizard, I just see "site cannot be reached." I'm connected to the same wifi network. I did the exact same thing I did a few days ago during the initial setup, but I just cannot get it to connect.