Extruder Mintemp error, I'm getting it with 4 out of the 5 extruders I have so far
I'm getting the Extruder Mintemp error frequently, in the middle of prints, when changing filaments, with at least four of the five extruders so far, seems random. I'm monitoring the temperature and see no more than a degree of temp fluctuation and then the error suddenly pops up. The help link, https://help.prusa3d.com/article/extruder-mintemp-error-17208-xl_395857, it suggests is
1. telling me to work on the individual extruder. It seems very unlikely it's all the sudden happening to all my extruders at the same time.
2. telling me this happens when "if the printer's nozzle temperature goes below 15 ºC at any point." This is NOT happening.
Can anyone suggest where to begin checking? I'm not really sure where to even start as it's clearly not the problem it's suggesting to look for.
RE: Extruder Mintemp error, I'm getting it with 4 out of the 5 extruders I have so far
Hi,
Does the mintemp Error follow when you switch the cables?
From Extruder 1 <-> Extruder 2 for example