Notifications
Clear all
Multi Extruders - First Layer
I try to print a model with Nylon CF15 and ABS Supports.
Extruder 1 - PA6
Extruder 2 - ABS
my first layer PA6 is good but the first layer ABS is under extruded. Is someone can tell me how to fix that !
Buse o.4 - Layer 0.2 - Bed (PA6/ABS) 100 - Temp ABS 260 - Temp PA6 285
Prusa 2XL
Thank you
Posted : 18/09/2025 2:24 pm