Offset calibration failed - Hardware, firmware and software help

RE: Offset calibration failed

Wados — Fri, 21 Feb 2025 00:54:38 +0000

I have the same issue as well

RE: Offset calibration failed

HSPF Pforzheim University — Wed, 19 Feb 2025 12:53:33 +0000

Hi,

I currently have the same problem. Current solution from support is the exchange of the force sensor.
Do you have another solution?

Posted by: @pax-33
Hi guys
I have the problem, that my Tool 5 failed on the calibration…
I already tried it on the position of tool 1 and it also failed…
this is the link to the failing process. https://youtu.be/K2DZn_f3nxk?si=r29q5nyBkDEoWAGY
I hope someone can help me.

Offset calibration failed

Pax 33 — Fri, 13 Dec 2024 15:59:48 +0000

Hi guys

I have the problem, that my Tool 5 failed on the calibration…

I already tried it on the position of tool 1 and it also failed…

this is the link to the failing process. https://youtu.be/K2DZn_f3nxk?si=r29q5nyBkDEoWAGY

I hope someone can help me.