Spool holder with bearings- new design- feedback appreciated - User mods - OctoPrint, enclosures, nozzles, ...

RE: Spool holder with bearings- new design- feedback appreciated

ssill2 — Fri, 08 Dec 2023 02:25:58 +0000

There’s a pretty good one for mk3/4 I’ve been using that inspired my design. Look for filler on printables

Posted by: @hello
Looks nice I like the roller design any chance you could make for the mk3 to

RE: Spool holder with bearings- new design- feedback appreciated

ssill2 — Fri, 08 Dec 2023 02:21:02 +0000

Not to shanghai the topic but the above is available on printables

https://www.printables.com/model/673222-prusa-xl-spool-holder-with-bearings-that-fits-with

this is meant to work with 3D upfitters enclosure. I should have a full set printed by morning

RE: Spool holder with bearings- new design- feedback appreciated

ssill2 — Thu, 07 Dec 2023 19:28:46 +0000

Left side. I have a new spindle that's longer that I'm printing.

RE: Spool holder with bearings- new design- feedback appreciated

ssill2 — Thu, 07 Dec 2023 12:24:21 +0000

Here's what the right side looks like. I may make some adjustments to the spindle to be slightly longer but this is the idea.

RE: Spool holder with bearings- new design- feedback appreciated

ssill2 — Thu, 07 Dec 2023 11:38:24 +0000

I'm also finalizing a design with bearings. in my case I needed one that would also work with the 3d upfitters enclosure on it. I have one on the right side now I'm printing one for the left to verify design. Then I'll probably post.

RE: Spool holder with bearings- new design- feedback appreciated

Hello — Thu, 20 Jul 2023 09:01:47 +0000

Thanks so much

RE: Spool holder with bearings- new design- feedback appreciated

René — Thu, 20 Jul 2023 06:43:20 +0000

Well here he is.

main-body-short-v6_remix

RE: Spool holder with bearings- new design- feedback appreciated

Hello — Wed, 19 Jul 2023 19:47:48 +0000

I might try that I knowbits a big Chace but could you change the connecting end to fit in the slots of a replicator 2 if you download the replicator 2 spool holder then add that end to this one it would be amazing and I would much appreciate it

RE:

bomtarnes — Wed, 19 Jul 2023 14:56:16 +0000

The roller is slightly smaller than the bearings; this wasn't the case in my first design!

It now provides good positive retention.

Screenshot-2023-07-19-at-15.54.04.png

RE: Spool holder with bearings- new design- feedback appreciated

LinkDJ — Tue, 18 Jul 2023 19:15:48 +0000

I like this design, but what's going to keep the spool from falling off the end?