Notifications
Clear all
Ceramic Resin
I would like to print the FormLab Ceramic Resin with the Prusa SL1. Does anyone have experience with it?
Posted : 31/10/2023 9:00 pm
Topic starter
answered:
RE: Ceramic Resin
It's not working.It is not possible to print the same thing twice with the same settings.
The FEP film is very quickly scratched by the ceramic particles (kaolin, quartz, feldspar) in the resin and therefore becomes increasingly opaque during printing.
The resin is not stable. The heavier ceramic particles sink and the resin separates (too) quickly during printing. It is therefore not possible to determine exactly the required exposure time. There are results, but they are coincidence.
Printer: Prusa SL1S
Resin: FormLabs Ceramic V1
Posted : 18/01/2024 8:36 am