Broken Touchscreen Mount - Hardware, firmware and software help https://forum.prusa3d.com/forum/original-prusa-sl1-hardware-firmware-and-software-help/broken-touchscreen-mount/ Prusa3D Forum Discussion Board en-US Sun, 10 May 2026 05:12:40 +0000 wpForo 60 RE: Broken Touchscreen Mount https://forum.prusa3d.com/forum/original-prusa-sl1-hardware-firmware-and-software-help/broken-touchscreen-mount/#post-674355 Mon, 18 Sep 2023 13:52:17 +0000 In case anyone else has the same problem as me in the future, many of the SL1S parts are the same as the SL1 parts that can be found on the github. This one in particular is at this link. https://github.com/prusa3d/Original-Prusa-SL1/blob/master/PRINTED%20PARTS/STL/SL1-DISPLAY_FRAME.stl

]]> Hardware, firmware and software help Melissa Anthony https://forum.prusa3d.com/forum/original-prusa-sl1-hardware-firmware-and-software-help/broken-touchscreen-mount/#post-674355 Broken Touchscreen Mount https://forum.prusa3d.com/forum/original-prusa-sl1-hardware-firmware-and-software-help/broken-touchscreen-mount/#post-670387 Wed, 23 Aug 2023 14:17:49 +0000 Hi all,

The 3d printed parts holding the touchscreen on my SL1s are broken, so the touchscreen isn't mounted firmly and is hard to use. It looks like the kit instructions just show it as one big assembly (https://help.prusa3d.com/guide/4-electronics-lid_11824#12248) and I can't find the parts for 3d printing on Printables (https://www.printables.com/model/71507-sl1s-speed-printable-parts/files)

Can someone help me find the file and guide for replacing this part, if one exists?

Thanks,

Melissa

]]> Hardware, firmware and software help Melissa Anthony https://forum.prusa3d.com/forum/original-prusa-sl1-hardware-firmware-and-software-help/broken-touchscreen-mount/#post-670387