SL1 and a hard resin
I need to print relatively small (~15 mm diameter) gears in my SL1 and, being gears that will rub together, I need the finished product to be as hard as possible. I have the white ABS-like resin, which does not appear to be so hard, and the transparent resin, from which I have several printed parts that are a few years old lying around that seem to be better from a hardness perspective.
Are there any other resins for use in the SL1 that people would recommend for hardness?
RE: SL1 and a hard resin
Im using Siraya tech build with fairly good results.
https://siraya.tech/products/build-resin-drillable-precision-printing
RE: SL1 and a hard resin
That's great, thanks, and available from Amazon in the UK. I'll give it a try.
RE: SL1 and a hard resin
FYI, that resin worked excellently, thanks for the recommendation. Here is the printed output in action:
RE: SL1 and a hard resin
Gald to be of help 🙂 Honestly i really like moving gears.