Printing Failures, can print the calibration without issues - Assembly and first prints troubleshooting https://forum.prusa3d.com/forum/original-prusa-sl1-assembly-and-first-prints-troubleshooting/printing-failures-can-print-the-calibration-without-issues/ Prusa3D Forum Discussion Board en-US Fri, 15 May 2026 13:54:51 +0000 wpForo 60 Printing Failures, can print the calibration without issues https://forum.prusa3d.com/forum/original-prusa-sl1-assembly-and-first-prints-troubleshooting/printing-failures-can-print-the-calibration-without-issues/#post-663751 Tue, 11 Jul 2023 16:48:48 +0000 Hello, I am having issues printing with my newly upgraded SL1S.  When printing the test file here  (the pre sliced one) the part comes out perfectly. Trying to print the same file using default slicer settings and the same resin results in the print being removed from the bed. 

Does anyone know what settings are different between the test print and the default settings?  I have not been able to print anything other than the test print since upgrading -- whether they stay stuck to the platform or not has become totally random. 

]]> Assembly and first prints troubleshooting nicholasav https://forum.prusa3d.com/forum/original-prusa-sl1-assembly-and-first-prints-troubleshooting/printing-failures-can-print-the-calibration-without-issues/#post-663751