Notifications
Clear all
Breakaway or dissolvable support for PCCF prints on MMU3?
I have a couple of parts which need to be printed in PCCF and which need close supports. I have a Prusa MK3.5 with MMU3 which I would like to use for this job. Does anyone have any suggestions for a suitable filament which I could use for the support?
This topic was modified 3 months ago by Onno
Posted : 18/09/2025 12:20 pm
RE: Breakaway or dissolvable support for PCCF prints on MMU3?
I see this is a late reply, but PLA works great as a support material for PCCF. Use SOLUBLE INTERFACE settings with PLA in slot 5.
MK4S/MMU3
Posted : 19/11/2025 2:45 pm
Topic starter
answered:
RE: Breakaway or dissolvable support for PCCF prints on MMU3?
Good to know! I already bought some Bambu Lab breakaway for PA, which was recommended to me by someone else. I'll try PLA as well.
Posted : 19/11/2025 4:24 pm