Simplify3D - MMU2 Single profile
Hello,
I've created special profile In case you want to use S3D for single filament prints.
Acts like a Slic3r MMU2 profile. Choose your filament at start and it unloads at the end.
Feel free to try it and let me know how you like it.
Often linked posts:
Going small with MMU2
Real Multi Material
My prints on Instagram
Re: Simplify3D - MMU2 Single profile
Great thanks for that, can I configure it to select the filament in the scripts section, I notice S3d lists them as ) to 5, my filament is on location 5 on the MMU so I would tell it to use T4 in s3d to use location 5 ?
Re: Simplify3D - MMU2 Single profile
Great thanks for that, can I configure it to select the filament in the scripts section, I notice S3d lists them as ) to 5, my filament is on location 5 on the MMU so I would tell it to use T4 in s3d to use location 5 ?
Not in this configuration. T0 (Tool 0) need to stay selected and I'm removing it from the gcode in the post processing.
Often linked posts:
Going small with MMU2
Real Multi Material
My prints on Instagram
Re: Simplify3D - MMU2 Single profile
Nikolai.r
Your profile works great, is there any chance you could do one for Pteg, or can I use this one and just alter the temps.?
Re: Simplify3D - MMU2 Single profile
Nikolai.r
Your profile works great, is there any chance you could do one for Pteg, or can I use this one and just alter the temps.?
My PETG profile difference is only the nozzle/bed temp. And the fan is on 20% from layer 3. Everything else is the same.
Often linked posts:
Going small with MMU2
Real Multi Material
My prints on Instagram