MMU2S- Filaments that work with default Prusa MK3S settings
I ordered a mish mash of discount filaments when I built my MMU2S, stupid I now know. After much screwing around with settings and different types and filament brands I found that Priline PLA works flawlessly with Prusa Generic PLA settings. I will continue to test other types but if any of you have found other brands and types of filament that work, at default settings without failure, I would love to hear about them. Please enter them in this thread.
Thanks,
Dave
RE: MMU2S- Filaments that work with default Prusa MK3S settings
I use Inland PLA and PLA+ as well as Amazon PLA and a roll of Superfila all with the default Prusament PLA profile with no issues.
I also use Amazon PETG using the Prusament PETG profile, though I turn the extruder temp down to 230 for all layers and leave the fan off until the 20th layer unless there are bridges or small layers before then (and then I leave it off for as many layers as possible).
RE: MMU2S- Filaments that work with default Prusa MK3S settings
one thing i find is there is more variance between various colors even within one brand than there is between brands. you really need to calibrate temps and speeds on a specific filament type ( brand/color). especially since many "brands" are made in common factories and just private labeled