Avisos
Vaciar todo
Something fun: R2D2-ish Alerts for your G-Code (...if your printer has a buzzer)
I thought to make my printer less boring and more talkative... so, I made this g-code sequences to produce buzzer sounds for various situations.
I am only using some, in my start and end g-code, but I thought to share them with you, in case some finds them interesting.
You can test them by saving the snippet on a .txt file on your SD card, rename the .txt to .gcode, and then simply load it on the printer as if it were a print file. It will show a warning the gcode is not complete, but that's fine. You'll hear the sound in the buzzer.
Then, you can add it into the custom g-code on prusa slicer (or octoprint) whenever you like ...
; Happy Ready M117 Ready to Print! G4 1000 M300 S800 P40 M300 S950 P40 M300 S1100 P40 M300 S1250 P40 M300 S1400 P40 M300 S1550 P60 G4 P100 M300 S1800 P30 ; ----------------------------- ; Go! Warning Sound v.1 M117 WARNING: Printing Now! G4 P1500 M300 S2000 P100 M300 S1700 P100 M300 S2000 P100 M300 S1700 P100 M300 S2000 P100 M300 S1700 P100 ; ----------------------------- ; Go! Warning Sound v.2 M117 WARNING: Printing Now! G4 1000 M300 S1000 P50 M300 S1200 P50 M300 S1400 P50 M300 S1600 P50 M300 S1800 P50 M300 S2000 P50 M300 S2200 P50 M300 S2400 P50 M300 S2600 P50 M300 S2800 P50 ; ----------------------------- ; Sad / Fail M117 Print failed :( G4 1000 M300 S1500 P80 M300 S1200 P80 M300 S900 P80 M300 S700 P100 G4 P100 M300 S500 P60 ; ----------------------------- ; Error - critical alarm M117 CRITICAL ERROR! G4 1000 M300 S2200 P150 M300 S1400 P150 M300 S2200 P150 M300 S1400 P150 M300 S2200 P150 M300 S1400 P150 G4 P200 M300 S2200 P150 M300 S1400 P150 M300 S2200 P150 M300 S1400 P150 ; ----------------------------- ; Successful Print Finish v.1 G4 1000 M300 S1000 P50 M300 S1300 P50 M300 S1600 P100 G4 P100 M300 S1400 P80 M300 S1700 P120 ; ----------------------------- ; Successful Print Finish v.2 - extended and melodic G4 P1000 M300 S1000 P60 M300 S1300 P60 M300 S1600 P80 M300 S1400 P60 M300 S1700 P100 G4 P100 M300 S1200 P60 M300 S1500 P60 M300 S1800 P120 G4 P150 M300 S1500 P80 M300 S1700 P150
Respondido : 10/07/2025 1:18 pm
2 les gusta
RE: Something fun: R2D2-ish Alerts for your G-Code (...if your printer has a buzzer)
Awesome. Just what I was looking for. Do you have more or where’s a site that might have songs and such.
Thanks
Respondido : 11/08/2025 6:46 pm