Re: Mk3 + 0.8mm nozzle
Anyone have 0.8mm profiles to share?
Re: Mk3 + 0.8mm nozzle
Anyone have 0.8mm profiles to share?
You're welcome to my config bundle here. Let me know if you just want specific profiles.
and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan
Re: Mk3 + 0.8mm nozzle
Thank you for sharing! 🙂
There is post processing script (print settings->output option):
/Users/bob/Documents/Shared/Slic3r/slic3r_massage.py;
Is there something interesting? Throwing error because of this fixed path 😉
Re: Mk3 + 0.8mm nozzle
Bob, thank you for sharing!!!
Re: Mk3 + 0.8mm nozzle
[...] There is post processing script (print settings->output option):
/Users/bob/Documents/Shared/Slic3r/slic3r_massage.py;
Is there something interesting? Throwing error because of this fixed path 😉
Ah, sorry about that. Just blank the post-processing script out under Print Settings->Output options->Post-processing scripts for now. It's a python script that mostly appends the print time estimate to the filename after slicing. I'll put a link and a description up soon, just a busy time. It is written in python, so you'll need to have python running on your system to use it.
and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan
Re: Mk3 + 0.8mm nozzle
Thanks for sharing Bob, a lot of work.
What is the change I need to make to load these profiles for MK3 MMU2 single?
RE: Mk3 + 0.8mm nozzle
Thank you for sharing! 🙂
There is post processing script (print settings->output option):
/Users/bob/Documents/Shared/Slic3r/slic3r_massage.py;Is there something interesting? Throwing error because of this fixed path 😉