v2 calibration from SD is great but nothing else prints
 
Notifications
Clear all

v2 calibration from SD is great but nothing else prints  

  RSS
trevor.b3
(@trevor-b3)
New Member
v2 calibration from SD is great but nothing else prints

Can someone list the reasons that the v2 calibration file on the SD card would print well, adhere nicely, seem to be the correct thickness of plastic laid on the bed, etc., but absolutely nothing else from the SD card even begins to print correctly? for example, the batman file doesn't even lay any plastic down at all...it's pretty strange...right after yet again printing the calibration and getting nice, even first layer and good adhesion.
thanks!

Opublikowany : 12/10/2017 6:33 pm
AJS
 AJS
(@ajs)
Noble Member
Re: v2 calibration from SD is great but nothing else prints

You might want to try a more accurate method of setting your live Z.

http://shop.prusa3d.com/forum/prusa-i3-kit-building-calibrating-first-print-main-f6/-before-you-ask-troubleshooting-video-updated--t472.html#p39190

If you are still having issues, show us a photo of the calibration file from step 6, and a photo of your print problem.

Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage or loss. If you solve your problem, please post the solution…

Opublikowany : 13/10/2017 2:40 am
stahlfabrik
(@stahlfabrik)
Honorable Member
Re: v2 calibration from SD is great but nothing else prints

Could be that your sd card is defect. What else could it be?

I think the files can be downloaded on the website. Put them on a different SD and try again.

Opublikowany : 19/10/2017 6:21 pm
steve.m11
(@steve-m11)
New Member
Re: v2 calibration from SD is great but nothing else prints

This 3d printer is my first and I am waiting on a replacement lcd card from Prusa, is there a way to do the v2 calibration from my computer? (it can read the card)

Opublikowany : 01/11/2017 12:14 am
Share: