Notifications
Clear all
Thermistor replacement
Hello,
from the beginning I had problems with temperature drops. At first I thought it was due to the part cooling fan, but after a while I realised it was caused by the thermistor wires. For a while that wasn't a big issue, I just had to push them slightly before every print and the print went finde, but now the temps are constantly going up and down, so I checked the thermistor more closely and saw, that the insulation on one of the wires had loosened and that the wire was exposed. So i guess it's time to replace the thermistor, but I have never done this before and was hoping someone here might have some useful tips.
Posted : 27/11/2017 11:18 am