Problems with first Prints
Hello Community ,
after I have mounted my i3 MK2S and hopefully successfully calibrated, I would like to thank Josef Prusa again for this great device.
However, some print problems occur in the individual layers.
I can not explain it to myself.
Maybe somebody knows what was wrong.
Slicer Software is Simplify3d but with Cura it is the same result.
Prusa PLA with 210 / 55 temperature
Greetings from Germany
Christopher
Re: Problems with first Prints
Docking station was with the "fastest" setting... in Simplify3d
the Ship was "Normal" Print setting
Re: Problems with first Prints
You've set the Start Perimeters to "Fastest" or "Random", that's why you get these marks on the outer shells. Set them to a specific point, ideal would be behind an edge of the benches... or in front of the bow.
dem inscheniör is' nix zu schwör...
Re: Problems with first Prints
thx
I used the Simplify3D Profile from the Prusa Website.
but where can i find these settings you are talking about in Simplify3d ?
Re: Problems with first Prints
Actually I'm on a business trip and only online with a tiny tablet, so I can't look in detail where you find the setting.
from my memory somewhere like ➡ layer setup ➡ start point ➡ set to specific location.
dem inscheniör is' nix zu schwör...