Notifications
Clear all

PINDA protector  

  RSS
christopher.d3
(@christopher-d3)
Estimable Member
PINDA protector

What material should I use to print the i3 MK2 PINDA protector? Temps are too high for PLA, I think. Thanks.

Opublikowany : 08/02/2017 8:28 pm
gabriele.s2
(@gabriele-s2)
Estimable Member
Re: PINDA protector

I haven't had any problems with PLA so far, though I've only printed PLA. YMMV.

- Gab

Opublikowany : 08/02/2017 10:18 pm
christopher.d3
(@christopher-d3)
Estimable Member
Topic starter answered:
Re: PINDA protector

Thanks. I wound up making one in ABS at the temperatures specified in the gcode, and one in PLA by tuning the temps down. I'm using the ABS one as I worry about the PLA being that close to the nozzle with high temperature filaments.

Opublikowany : 09/02/2017 12:46 am
Share: