Notifications
Clear all

No Power  

  RSS
liam.k2
(@liam-k2)
New Member
No Power

Hi. I've finished building my Prusa i3 Mk2S kit and have no power.

- I have quintuple checked my electrical setup.
- I have tested all fuses in the rambo with a multimeter
- I have ensured my PSU is set to 110V (Am in Canada)
- I have tested the fuse above the power port on the PSU
- I have tested the power cable for continuity
- I have tested the AC outlet

While researching and testing I have also noticed that in other cases of power issues there is talk of an LED being lit within the PSU or Rambo. Neither of this are lit for me.

I am now thinking I potentially have a faulty PSU, but wanted to seek some additional help before initiating that process.

Anything else I can do to isolate the problem?

Posted : 03/12/2017 1:44 am
Share: