Notifications
Clear all
Missing RAMBO cover stl 1.75
Dear all, I broke a part of the cover of the Rambo during the assemly.... So i'm thinking to print it again... I saw that there are the STL files for the printer on the website but the zip file of the 1/75mm it's missing the parts of the rambo. I saw in the 3mm there are... so I was wondering if it's the same part... Many thanks in advance!
Posted : 01/04/2016 4:15 pm
Re: Missing RAMBO cover stl 1.75
Hi Francesco
STLs are here: https://github.com/prusa3d/Orignal-Prusa-i3/tree/master/Printed-Parts/stl
Peter
Please note: I do not have any affiliation with Prusa Research. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage…
Posted : 01/04/2016 4:28 pm
Topic starter
answered:
Re: Missing RAMBO cover stl 1.75
Thank you very much!
Posted : 01/04/2016 5:27 pm