Prusa3D Forum - Recent Topics

Duplicate posting removal?

RedDawg — Thu, 28 May 2026 15:26:25 +0000

Somehow, a response of mine to a post got duplicated. Neither of them has received a subsequent response, so I would like to delete one of them but don't find a way to do so. Is this possible?

Filament Jamming

Infoteq — Thu, 28 May 2026 12:59:46 +0000

I'm mid-print (10 of 12hrs), towards the end of the third spool of the same filament (CookieCAD PETG Pink Star Stuff) and out of the blue I get a filament jam. Now this is pretty common since 6.4.2 (i think) where it got more sensitive or whatever and I usually just reload and off I go, but in this case it just got worse. I tried clearing the nozzle with a cleaner tool and that helped for about 30sec of print time. Now I'm stuck with this behavior where I can't even get it to extrude to attempt continuing and I am at a loss as to why. Here is a video showing the behavior. I even tried subbing in some PLA that I've never had any trouble with from a partially used spool, but it exhibited the same behavior.

On the vendor site they said jams were common, but after 2 and 3/4 spools of this filament, I'm not sure that is really the issue. Any advice would be appreciated. There's already some minor defects as a result of these shenanigans, I'd hate to lose the whole job.

Buddy Camera a mistake?

dmbgo — Thu, 28 May 2026 04:45:14 +0000

For years, I have been using Octoprint, mainly just to remotely monitor, by video stream, the ongoing print jobs on my 3d printers. Last year Prusa sold things via Amazon, so I bought the buddy camera for my Core1. I thought that it would be easier than OP, since it was made by the printer's manufacturer. I was very wrong. It seems like it is just a way of making you conform to the Prusa ecosystem, and often drops out to boot, requiring another protracted setup. It's not working yet again, and I am considering binning it, and reverting to OP.