Notifications
Clear all

Printing Flex  

  RSS
massimo giandomenico.b
(@massimo-giandomenico-b)
Active Member
Printing Flex

Any suggestions?
This is what’s happen to me 😀

Posted : 15/02/2018 3:27 pm
Rosparovac
(@rosparovac)
Estimable Member
Re: Printing Flex

We had the same issue several times. Try to switch of retraction (Zhop). Sometimes it is happening againt, but most prints are done.

University: MK2S upgraded to MK3 with MMU2.0
Home: MK3
Materials: ABS; ASA; PETG; PET; PLA; Nylon; Nylon Carbon; CPE;
SW: Freecad 0.18; Slicer PE And still generating more troubles than whole forum together.

Posted : 17/02/2018 5:20 pm
Share: