Clear all

[Solved] Printing carriage for third-party hotends.  

New Member
Printing carriage for third-party hotends.

I've successfully printed all parts for MK3/S upgrade, using Prusa G-code, & PETG that came with the kit.

I'd like to know some critical settings in the G-code, so that I can slice a carriage to use a Mosquito hot end in my other MK3.

I have the necessary files to slice, but no idea of optimal temp, speeds, layers, shells, infill, etc... Still using Prusa PETG or this one too.

Posted : 01/08/2020 7:36 pm