Notifiche
Cancella tutti
Pagina 2 / 2
Precedente
Re: Need ABS Help / Suggestions
PRINT HOT!
You may have to adjust cooling depending on the fan shroud you have.
Postato : 12/01/2019 1:18 am
Re: Need ABS Help / Suggestions
About to give this a shot... I've been getting sags on overhanging features.. Esp on the R3 revised housing parts. Thanks for the profile Alex! What fan shroud are you using with this profile?
Did anyone have any issues when importing this profile into slicer? After slicing with the profile the temp shoots all the way down from 270 to 150... Not sure why its doing that.
Postato : 04/02/2019 10:20 pm
Pagina 2 / 2
Precedente