Cannot print Colorfabb PLA ECONOMY DARK BLUE 1.75mm
Hello world!
I have been printing for roughly 300 hours with my new (kit-assembled) mk3s without issues using Prusament PLA in different colors and filaments.ca ecotough PETG ( https://filaments.ca/products/ecotough-petg-2-0-black-1-75mm ) without any problem. The ecotough gave me some challenges, but I was able to resolve them in few trials. My prints come out great and sharp. I use both the smooth sheet and the textured sheet without problems.
I just cannot get the first layer adjusted for the Colorfabb PLA ECONOMY DARK BLUE 1.75. I used different temperatures, different sheets, tried the glue stick... Obviously, applied the Tips and tricks https://colorfabb.com/pla-economy-dark-blue ... Looked at the spec for some clues... https://colorfabb.com/files/TDS_E_ColorFabb_Economy_PLA.pdf
Any one here to help me, please 🙂
RE: Cannot print Colorfabb PLA ECONOMY DARK BLUE 1.75mm
Update: I get some results (i.e., not completely unprintable, but not usable either) by shutting down the cooling fan...