Notifications
Clear all
Strona 2 / 2
Wstecz
RE: Buildplate damaged by PETG
@robert-rmm200
Thanks. There are conflicting information on the internet. Some people suggested removing objects at 50-80c. other said under 30c. Who is correct?
Opublikowany : 31/03/2020 7:40 pm
RE: Buildplate damaged by PETG
I say put the build plate in the freezer if you have problems removing an object.
All you are trying to do is get the object to shrink a bit, which pops it off.
Opublikowany : 31/03/2020 9:27 pm
prusanewuser polubić
RE: Buildplate damaged by PETG
@lichtjaeger
Speaking of the textured plate, what do I have to do to get prints to stick to the textured plate? Have tried PETG and PLA without luck. Have trying to not use the sticky.
Dave Robinson, KB7GP
Opublikowany : 07/04/2020 5:57 am
Strona 2 / 2
Wstecz