Avisos
Vaciar todo

things needed to assemble the i3 MK3  

Página 2 / 2
  RSS
ed
 ed
(@ed-3)
Reputable Member
Re: things needed to assemble the i3 MK3

I read that taps were handy to have but it doesn't seem like anyone here is cleaning threads prior to assembling. I wonder if Prusa will send an extra nozzle in lieu of the tools..

Respondido : 04/12/2017 9:13 pm
oliver.k3
(@oliver-k3)
Trusted Member
Re: things needed to assemble the i3 MK3

So i am in the middle of assembling mine and just some thoughts:

I would have love a Wrench for the 6 M3 Nyloc nuts used to strap the linear bearing to the Y-Carriage. turning them just with the needle nose pliers is a pain in the ass and an easy way to scratch the Y-Carriage.

A tapper would have come in handy for one of the threading on the frame but i managed with going in from the other side with the screw and working it a little bevor assembling.

I used a "ifixit" Hex2,5 screwdriver for most of the assembly. Some threads are rather long and it can get annoying doing all that with just an allen key.

Most Important: good large flat table with lots of free space on it!

All in all: you dont "need" anything else that is not supplied by Prusa. But some tools just make it alot easier 😉

Respondido : 05/12/2017 2:15 pm
Página 2 / 2
Compartir: