Simplfy 3D Settings for TPU / PLA / PETG - Others (Archive)

RE: Simplfy 3D Settings for TPU / PLA / PETG

Rods — Thu, 02 Jul 2020 20:58:20 +0000

Posted by: @rhys-e
Simplify 3D Settings!
PLA - https://www.dropbox.com/s/vuzcb1cul75z3i5/MK3%20PLA.fff?dl=0
PETG - https://www.dropbox.com/s/midu2wqej7goqug/MK3%20PETG.fff?dl=0
TPU - https://www.dropbox.com/s/cp2xgmqqy988qs9/MK3%20TPU.fff?dl=0
There is also a MK3 STL u can download here - https://www.dropbox.com/s/w5rocx1j30ff98t/Prusa_MK3_Assy_STL_-_FULL.STL?dl=0
Simply place that STL in this folder %userprofile%\AppData\Local\Simplify3D\S3D-Software\
Or follow instructions here. note I have already put the code in the FFF files above. https://www.dropbox.com/s/fffd3d0t5ub1kqf/Instructions%20for%20S3D%20Background%20Image.txt?dl=0
Source for STL I have - https://www.thingiverse.com/thing:2751051
I am using a custom Shroud here - https://www.thingiverse.com/thing:2720541
I would love all feedback so please if you use it and improve upon it or have questions please let me know!

link is broken, repost pleaseee

RE: Simplfy 3D Settings for TPU / PLA / PETG

tegmento — Mon, 16 Dec 2019 10:22:24 +0000

link are dead. if possible re upload profiles.

Re: Simplfy 3D Settings for TPU / PLA / PETG

dale.c2 — Mon, 28 May 2018 03:53:09 +0000

So I tried the PETG profile and my Mk3 isn't recognizing the G-code file. It just doesn't show up in the files on my MK3.

EDIT: As usual it was my error. I had illegal characters in my file name. :D

Re: Simplfy 3D Settings for TPU / PLA / PETG

Brigandier — Sun, 14 Jan 2018 22:58:46 +0000

Simplify 3D Settings!
PLA - https://www.dropbox.com/s/vuzcb1cul75z3i5/MK3%20PLA.fff?dl=0
PETG - https://www.dropbox.com/s/midu2wqej7goqug/MK3%20PETG.fff?dl=0
TPU - https://www.dropbox.com/s/cp2xgmqqy988qs9/MK3%20TPU.fff?dl=0

There is also a MK3 STL u can download here - https://www.dropbox.com/s/w5rocx1j30ff98t/Prusa_MK3_Assy_STL_-_FULL.STL?dl=0

Simply place that STL in this folder %userprofile%\AppData\Local\Simplify3D\S3D-Software\

Or follow instructions here. note I have already put the code in the FFF files above. https://www.dropbox.com/s/fffd3d0t5ub1kqf/Instructions%20for%20S3D%20Background%20Image.txt?dl=0

Source for STL I have - https://www.thingiverse.com/thing:2751051
I am using a custom Shroud here - https://www.thingiverse.com/thing:2720541

I would love all feedback so please if you use it and improve upon it or have questions please let me know!
Will be interesting to compare these to the settings in the S3D thread Josef posted. I print primarily in PETG using Slic3r, will let you know how these go when I am back at my printer next week. :)

Simplfy 3D Settings for TPU / PLA / PETG

Phaser3D — Sun, 14 Jan 2018 22:47:08 +0000