Print does not stay in place on the base
I try printing this little guys, but this is the end result, what is wrong?
I cleaning the surface isopropyl alcohol and secon step i try aseton. 😯
Re: Print does not stay in place on the base
Hi Lauri...
can we please chech the soles of their feet...
if we can see layer 1, we will have a better idea, however I will guess that Live Z is too high....
regards Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK
Re: Print does not stay in place on the base
legs as seen from below 🙂
Re: Print does not stay in place on the base
I don't see any pictures... just a blank spot.
Re: Print does not stay in place on the base
Maybe google cache drive expired ;). I saw it short. The issue was a first layer too high like guessed by Joan.
There are not many options if it's not sticking. It's always:
1. First layer too high
2. Not properly cleaned bed
3. Any other crazy first use issues like bed not heated, uneven/damaged bed, ABS or bad filament.
Often linked posts:
Going small with MMU2
Real Multi Material
My prints on Instagram
Re: Print does not stay in place on the base
Thanks for tips, now all is correct. I change live Z -0.600 -> -0.750 😀
-lare-
Re: Print does not stay in place on the base
good to hear you're having success
regards Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK