Notifications
Clear all
Printing benchy with TPU
Hello,
I've been trying to calibrate my MK3S to print with DevilDesign TPU. To do this, I've been using Benchy to test the settings. The problem I'm running into is that despite changing various settings, the chimney keeps coming out as one big blobby mess.
Overall the print quality is decent (except for some stringing). I've tried reducing the print speed to 1mm^3/s, changing the temperature, using both Generic FLEX and SemiFlex settings, all to no avail. I would appreciate any suggestions.
The printer is working wonderfully when using PLA/PET-G filaments.
Posted : 13/04/2020 1:53 pm