Print other Items
Hi Guys!
I hope somebody can help me.
I just assembled my MK3 printer and went successful with demo print from SD card.
After that i downloaded some STL files from prusaprinters.org which mostly all struggle and faile while printing (filament get distorted...).
My question is what would be the buttons to look for to adjust "foreign" files (what to edit with slicer) to tweak them to work with my MK3.
Thank you!
RE: Print other Items
Can you post a photo and a link to one item you are trying to print? This is way too vague.
--------------------
Chuck H
3D Printer Review Blog
RE: Print other Items
Pictures of the failed prints would help us diagnose the problem. Show the first layer, or at least the bottom of a print as well.
The most likely cause; I admit I am guessing here, is a poorly adjusted first layer Z, or a dirty print surface.
RE: Print other Items
There is no point and click option to print everything. 3D printing requires an investment of time and some basic skills be learned.
I'd start by reading the handbook that comes with every Prusa printer.
RE: Print other Items
@tim-2
3D printing is a learned are not too different from medicine. You have to get a feel for the printer's nature and rise the science of the material and engineering of the machine to get it right. You have to learn to get the feel for the first layer as lays down. Sure you are using your eyes and listening to the machine, but it is very much a feeling or gestalt.
--------------------
Chuck H
3D Printer Review Blog
RE: Print other Items
Throw a leach on it, you'll be fine, a good blood letting goes along way. 😉
The Filament Whisperer
RE: Print other Items
Black Knight: NONE SHALL PASS.
Arthur: (taken aback) What?
Black Knight: NONE SHALL PASS.
Arthur: I have no quarrel with you, good sir knight, but I must cross
this bridge.
Black Knight: THEN YOU SHALL DIE.
Arthur: I *command* you, as king of the Britons, to stand aside.
Black Knight: I MOVE FOR NO MAN.
Arthur: So be it! (draws sword)
A short battle ensues, where Arthur, relatively unencumbered by armor, easily
dodges the slow and heavy strikes by the black knight. Finally, Arthur
dodges a strike, steps aside, and cuts the black knight's left arm off with
his sword. Blood spurts from the knight's open shoulder.
Arthur: Now stand aside, worthy adversary.
Black Knight: 'Tis but a scratch.
Arthur: A SCRATCH? Your arm's off!
Black Knight: No it isn't!
Arthur: Well what's that then? (pointing to the arm lying on the ground)
Black Knight: I've had worse.
Arthur: You LIAR!
Black Knight: Come on, you pansy!
RE: Print other Items
@swiss_cheese
Leaches came back for a while. Now they are out of vogue again.
--------------------
Chuck H
3D Printer Review Blog
RE: Print other Items
@tim-2
Holy Grail. Fantastic movie.
--------------------
Chuck H
3D Printer Review Blog
RE: Print other Items
At the risk of going off topic... I thought Americans generally didn't appreciate Monty Python!
RE: Print other Items
@minormatt
That would be a gross misrepresentation and over generalization. I am not offended so don’t take it that way.
I am British by heart from all four grandparents. The sense of humor is dry and somewhat sarcastic. I get it and love it. I watch all of the Monty Python movies and skits as a student in college. I continue to share it with my wife and son.
For many Americans, it is an acquired taste, but I get it. Our humor is more sarcastic, but very similar.
--------------------
Chuck H
3D Printer Review Blog
RE: Print other Items
At the risk of going off topic... I thought Americans generally didn't appreciate Monty Python!
I've had the DVD collection for years. Monty Python is quite popular in the US. Not everybody's taste, but we have a lot of people, so the numbers add up.
RE: Print other Items
"I am a lumberjack and I'm ok ..."
RE: Print other Items
@tim-2
“He's a lumberjack and he's OK
Sleeps all night and he works all day”
--------------------
Chuck H
3D Printer Review Blog
RE: Print other Items
@tim-2
ok, you can always endear yourself to me with by quoting monty python 🙂
"let me face the peril!"
RE: Print other Items
Its just a rabbit!
RE: Print other Items
@minormatt
I spent the majority of my youth in the UK. While I'm not a brit I do feel I like I was there in the right years to absorb all the best parts of British culture, and that includes Monty python 🙂
"Those responsible for those responsible have been sacked".
RE: Print other Items
@minormatt
That rabbit's dynamite!
RE: Print other Items
And of course, the number of the counting shall be three. Five's right out!
RE: Print other Items
The one exchange that really made an impact is the Python query about the airspeed of a certain swallow... It hammered home the old point: "Details matter!"