Notifications
Clear all
More clogging with prusa Orange?
Since I have the printer, I used a lot silver, black, blue and orange PLA (about 1kg each)
With the orange PLA, I observe about once every 2-3 hours brownish residue in the print. I also had a full clog once (solved by cold pull) and one partial clog (the extruder gears were clicking and I had print quality issues)
None of this happens with the other three colors.
Is that a known issue with some colors? A defective batch? Can I tune some parameters?
Thanks!
Posted : 22/12/2021 10:36 am