Notifications
Clear all

How transparent/translucent is Flexfill Natural?  

Strona 2 / 2
  RSS
--
 --
(@)
Illustrious Member
RE: How transparent/translucent is Flexfill Natural?

@dan-rogers

-45 for angle somehow makes infill mono-directional??? Hmm.

Opublikowany : 21/05/2021 7:54 pm
--
 --
(@)
Illustrious Member
RE: How transparent/translucent is Flexfill Natural?

@cwbullet

A feature on Mars photographed decades ago that alien nerds said was proof of intelligent life on Mars. There have been books written about it.  Many "enhancements" to show it was an Egyptian mask. More recent imaging more or less proved it was all a trick of light and lack of resolution.

Opublikowany : 21/05/2021 7:58 pm
cwbullet
(@cwbullet)
Member
RE: How transparent/translucent is Flexfill Natural?

@tim-2

I knew I saw that somewhere before.  Thanks.  That would a great silhouette in a transparent print.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 21/05/2021 8:00 pm
Dan Rogers
(@dan-rogers)
Noble Member
RE: How transparent/translucent is Flexfill Natural?

@tim-2

Yes - it's apparently a magic number.  It is entered in PS as 315.

I did not know how to enter it when I printed the bird house clear back.  So I adjusted by using concentric infill - which for the same shape outer perimeter will always lay the same pattern down = one layer right on top of the other.

 

Opublikowany : 21/05/2021 8:30 pm
ssill2
(@ssill2)
Noble Member
RE: How transparent/translucent is Flexfill Natural?

@dan-rogers

I know I've seen you mentioned the glass printing before.  do you use the author's recommendtion of Overture clear PETG or have you had similar results with other clear PETGs.  I'm interested in trying to do this and you seem to have the most experience with it.

Opublikowany : 21/05/2021 10:04 pm
ssill2
(@ssill2)
Noble Member
RE: How transparent/translucent is Flexfill Natural?

@dan-rogers

315.... makes me think of hunt for red october lol.   Ryan, turn this until it says 315.... 🙂

Opublikowany : 21/05/2021 10:10 pm
cwbullet
(@cwbullet)
Member
RE: How transparent/translucent is Flexfill Natural?

@ssill2

I will be testing a few filament types this week.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 21/05/2021 10:42 pm
Strona 2 / 2
Share: