Notifications
Clear all
Drying Issue?
I've been having real trouble with my prints. I'm thinking it's a drying issue. Is what's pictured here an indication of that? They seem to start off fine but later in the print they fail. I'm guessing that's due to the outer strands on the spool being dry and as the spool continues on a long print it's "wetter" on the interior? Would love some guidance here.
Posted : 14/07/2023 3:59 pm
Topic starter
answered:
RE: Drying Issue?
Just tried the 20x20 mm calibration cube with the same results. The white PLA had been in a dryer for 5+ hours so I don't think that's the problem.
Posted : 14/07/2023 5:52 pm