RE:
This is a profile I designed for Overture PETG, it is very close to Amazon basic as filaments go. I'm not familiar with Atomic but this may help you, and take some time to learn what the settings do play, play, and play some more. change one thing at a time, see the result is, then move on and change something else.
Main_Swiss.3mf
Good Luck, Have fun
Swiss_Cheese
This link doesn't work, and I'm trying to get PETG to work, so would really like to know if someone has this file or if the Author @swiss_cheese could re-link it.
RE: Drooping on measly 5mm bridge with PETG
I hate to revive an old thread, but @Swiss_Cheese, do you still have that Main_Swiss.3mf file available anywhere? It returns a 404. And I'm trying to improve my bridging with Overture PETG.
Thank you.
RE:
Lot of unanswered questions in this thread.
1) What profile did he butcher?
2) What critical changes makes your profile better?
3) HOW did you achieve this results? These bridging results for PETG are extremely unusual, so would be really great to have some specifics here.
You butchered this profile, changing things when you didn't understand what they do, and that's why your PETG isn't printing well, PETG can bridge just fine. I printed your part with no issues what so ever using a properly adjusted profile.
These temp towers are both PETG and the bridging you see on them is almost 30mm (more then an inch),
and I've bridged PETG much farther then that.
This is a profile I designed for Overture PETG, it is very close to Amazon basic as filaments go. I'm not familiar with Atomic but this may help you, and take some time to learn what the settings do play, play, and play some more. change one thing at a time, see the result is, then move on and change something else.
Main_Swiss.3mf
Good Luck, Have fun
Swiss_Cheese
RE: Drooping on measly 5mm bridge with PETG
Mr. Cheese is not around anymore, add that and the fact that the forum deletes attachements to the list of mysterious things that happen due to reasons...
If at first you don't succeed, skydiving is not for you.
Find out why this is pinned in the general section!
RE: Drooping on measly 5mm bridge with PETG
Mr. Cheese is not around anymore, add that and the fact that the forum deletes attachements to the list of mysterious things that happen due to reasons...
If at first you don't succeed, skydiving is not for you.
Find out why this is pinned in the general section!
RE: Drooping on measly 5mm bridge with PETG
Does anyone have a copy of Main_Swiss's original Main_Swiss.3mf file for PETG they could post or send me?