3DXTech AmideX GF
Anyone here print with this? I print Dupont Zytel GF no problem, but so far the 3dXTech is garbage. Horrible print quality and and oozes like crazy at all printable temps. Any tips?
RE: 3DXTech AmideX GF
I have and like the filament in general. I wonder if you got a bad roll.
--------------------
Chuck H
3D Printer Review Blog
RE: 3DXTech AmideX GF
@charles-h13
You know, now that I think of it I don't remember drying it. I'll dry it out and see what I get. This was a sample roll.
RE: 3DXTech AmideX GF
Let me know how it works out.
--------------------
Chuck H
3D Printer Review Blog
RE: 3DXTech AmideX GF
@charles-h13
I finally had a chance to give this another go with dry filament and I'm still getting extremely poor results. Maybe I did get a bad roll. Would you mind sharing your print settings for this filament? Thanks
RE: 3DXTech AmideX GF
Sure:
I used a glue stick and. .6-1.0 nozzle with 0.4mm layer height. Temps: 275 at the nozzle and 115 on the bed.
I slowed the print way down. I can't remember that speed. I think it was 15-30mm/s.
--------------------
Chuck H
3D Printer Review Blog
RE: 3DXTech AmideX GF
@charles-h13
ok thanks for that. I'm running a .4 nozzle and can't go larger for what I'm doing. I sent a message to 3dXTech we'll see what they say.