Notifications
Clear all
Prusa MK3S+ USB communication failures
Suddenly, I am unable to print anything with the USB cable. The printer's USB interface on windows 10 allows the printer's firmware to be flashed. The USB interface allows Gcode commands to be transmitted but there is no return communication received over the USB port. I tried a new cable but there is still no return communication from the printer. I tried ponterface with debug gcode mode and Octoprint using a raspberry Pi.
The USB is recognized by windows and the raspberry Pi. Commands can be sent but no replies are received.
Any ideas?
Posted : 08/08/2021 8:18 pm