Crash Upon Starting Print
Hello my i3 MK3S+ is always crashing when I try to print specific G-Code from PrusaSlicer, any advice on how to fix it or what I could be doing wrong? It's only some prints.
RE: Crash Upon Starting Print
The fact that you are not getting answers should give you an indication that your question is broad to the extent you could have asked "My dinner did not taste well, what did I do wrong?".
I try to give answers to the best of my ability, but I am not a 3D printing pro by any means, and anything you do you do at your own risk. BTW: I have no food for…
RE: Crash Upon Starting Print
@justme3d
Ok here is more specifics. I didn't want to bombard people with specifics which I also get criticism for.
Printer: Prusa Research Original Prusa i3 MK3S+ Running 3.9.3
Slicer: PrusaSlicer 2.3.0
Octoprint: OctiPi 0.18.0
ArcWelderPlugin: 1.0.0 ( https://plugins.octoprint.org/plugins/arc_welder/)
Slicer Output: J1772_Wall_Dock_0.2mm_PETG_MK3S_2h32m
ArcWelder Output: J1772_Wall_Dock_0.2mm_PETG_MK3S_2h32m.aw (ArcWelder settings noted at top of .gcode file.)