Improving the texture of PETG on PEI sheet
When I google this, I can only find adhesion issue which I certainly don't have. But I do struggle to get the nice textured finish on the underside when using the MK3S in the office at work. I don't seem to have this problem at home on my own 3S+. I understand they are both practically the same.
I have tried;
- Hotter nozzle
- Slower first layer
- Lower first layer
- Overture & Eryone PETG
Any other things I should be looking at?
Thanks.
RE: Improving the texture of PETG on PEI sheet
Pictures of the underside, may help!
Often this is a Live Z issue!
regards Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility.Location Halifax UK
RE: Improving the texture of PETG on PEI sheet
Hi Joan, I have taken it to the extreme and it still has no texture, just a mess due it being too low.
RE: Improving the texture of PETG on PEI sheet
Do you have pictures?
regards Joan
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility.Location Halifax UK
RE: Improving the texture of PETG on PEI sheet
Here you go.
RE: Improving the texture of PETG on PEI sheet
This is bizarre, 2 failed prints of the same model now.
Please save your project as a .3mf file
Files > Save Project as
Zip the .3mf and post it here. It will contain both your part and your settings for us to diagnose.
Cheerio,