Notifications
Clear all

LCD / front panel buzzing on some Y movements?  

  RSS
talz13
(@talz13)
Eminent Member
LCD / front panel buzzing on some Y movements?

The printer is working fine, but I've noticed lots of buzzing on the LCD / front panel area when making certain Y axis movements. It's not all the time, but when it happens, it's like something is buzzing or rattling within the front panel. If it is buzzing, I can push down or squeeze together the front panel, and the buzzing is dramatically reduced, though I still feel it in my fingers while I'm holding it down.

Here's an example:

https://photos.app.goo.gl/txCe6ZC3x9AQJhpX8

Prusa i3 MK3 kit
MK3/S Upgrade Kit
FW 3.7.0
Slic3r PE 1.41.3

Posted : 18/06/2018 2:33 pm
Erik
 Erik
(@erik-3)
Estimable Member
Re: LCD / front panel buzzing on some Y movements?

Tighten down the screws in the back that hold the LCD into the housing.

Posted : 18/06/2018 5:23 pm
Joe Prints
(@joe-prints)
Estimable Member
Re: LCD / front panel buzzing on some Y movements?

I have had this same problem on both MK2 and MK3. You can use https://www.thingiverse.com/thing:2967108 (printed in TPU) to eliminate the vibrations from the Y-axis.

Anything can be made better
https://www.myminifactory.com/users/Joe%20Prints

Posted : 18/06/2018 7:58 pm
Share: