Notifications
Clear all

Help! Newbie just assembled - first layer blues  

  RSS
Richard Weedon
(@richard-weedon)
New Member
Help! Newbie just assembled - first layer blues

What is this condition called and how can I fix it? It does this trying to print anything. Even the boxes for first layer calibration can do this.
PINDA is set to height of tie strap without steel sheet per the guide picture.
Thank you for any assistance

Publié : 29/10/2018 5:25 pm
Richard Weedon
(@richard-weedon)
New Member
Topic starter answered:
Re: Help! Newbie just assembled - first layer blues

To clarify, this is trying to print calibration_surface_PLA_75x75@200um_v4.zip.
No changes from default. Latest firmware.

Publié : 29/10/2018 5:31 pm
Neal
 Neal
(@neal)
Reputable Member
Re: Help! Newbie just assembled - first layer blues

Now you need to start adjusting "live z". Down I believe from the looks of things.

Neal

Publié : 29/10/2018 6:44 pm
Richard Weedon
(@richard-weedon)
New Member
Topic starter answered:
Re: Help! Newbie just assembled - first layer blues

Cranked it to -.500 z and it is printing now!!!! Thanks Neal!

Publié : 30/10/2018 5:07 pm
Neal
 Neal
(@neal)
Reputable Member
Re: Help! Newbie just assembled - first layer blues

Welcome....FYI...stay patient tho...the tweaking has just begun.

Neal

Publié : 30/10/2018 5:11 pm
Partager :