Notifications
Clear all

First print problems  

  RSS
hihaiu
(@hihaiu)
New Member
First print problems

Hello!

Prusa logo and batman sign turned out fine, but Nefertiti statue has some flaws.
(Logo and batman sign were printed with older firmware)

Nefertiti is printed from sd card. I didn't change any default settings.

Material: PLA

Firmware: 3.2.1-576

Bed heat: 60 °C
Extruder heat: 210 °C

Y Collisions: 24 (? no collisions really, and Y-movement was smooth when I was assembling the printer )
Belt tightness Y: 275
Belt tightness X: 246

What could be causing these problems?
Is the default speed too fast?

Posted : 05/06/2018 4:50 pm
Share: